AV-30 fits in your existing 3” panel slot seamlessly. By mounting from behind, it preserves the “round dial” look, and eliminates the need for cutting or replacing your panel
Avoid Stalls
The AV-30 alerts you visually and aurally if you approach a dangerous AoA. AoA is calculated by comparing the aircraft’s pitch, flight path, and G-loading.
Travel beyond borders with tailBeaconX, the globally accepted, Aireon enabled, 1090/ES ADS-B Transponder. AV-30 paired with tailBeaconX allows you to easily set your mode and squawk while enabling additional functionality to AV-30.
Upgrade your legacy vacuum driven instruments to digital precision attitude and directional gyro customizable displays.
Primary Attitude
Primary Slip
Primary Direction Indication
Probeless Angle Of Attack
Indicated Airspeed (KTS/MPH)
Altitude / Vertical Trend / Alerter
+8 / -8 G-Meter
OAT / TAS / Density Altitude
Bus Voltage
GPS Navigational Data Overlay
GPS HSI / 360 Rose / Arc Map Mode
Customizable Colors, Fonts, & Layout
Audio Alerts (AoA, G, Roll Limits)
2 Hr Typical Internal Battery Operation
Specification |
Value |
---|---|
Input Voltage Nominal |
+10 to +32 VDC |
Input Voltage Max |
+60 VDC |
Input Power Nominal |
6 Watts (0.5 Amps @ 12VDC) |
Input Power Max |
12 Watts (1.0 Amps @ 12VDC) |
Required Circuit Breaker |
2 Amp |
Operation on Battery |
2 Hours Typ @ 20°C / 30 Minutes Min @ -20C |
Physical Attributes |
|
Mounting Configuration |
3 1/8” Round Instrument Hole |
Dimensions wo/Connector |
3.38 x 3.38 x 1.6 Inches |
Weight |
0.50 Lbs. |
Electrical Connector |
15 Pin Male D-Sub |
Pneumatic Connectors |
¼” OD Quick Connect |
Mounting |
(4X) #6-32 Machine Screws |
Case Material |
Billet Aluminum |
Environmental |
|
Operating Temp |
-20°C to +55°C |
Storage Temp (48 Hrs) |
-30°C to +80°C |
Humidity (48 Hrs) |
90% RH |
Display |
|
Diagonal Size |
3” Circular |
Contrast Ratio (Typical) |
500 |
Brightness (Typical) |
1000 cd/m2 |
Viewing Angle Left/Right |
60° |
Viewing Angle Up |
45° |
Viewing Angle Down |
10° |
Backlight Lifetime (Typical) |
50,000 Hrs |
Can I use the AV30 in the DG mode to replace my current indicator connected to my Garmin GPS 400, (non waas) and stay instrument certified for gps approaches?
The AV-30C is NOT approved to replace the current CDI in the aircraft. This is referenced in section 10.2.5 of the AV-30C Installation Manual linked below.
AV-30C Installation Manual
From the manual:
"This output does not provide IFR compliant lateral or vertical guidance, therefore all deviation related data presented is for VFR operations only."
What about older autopilots like Piper Autocontroll III, anything in thefuture?
The manufacturer is working on certification for autopilot interfacing. What the interfaces will work and with what systems it will interface to. There is no indication of when this will be complete. Hoping sometime in the coming year.
Does the DG configuration have a interface for s-Tec auto pilot?
At this time, October 2021, the AP interface is not yet available. They are expecting this to be completed late 2021 or early 2022.
Does this price include the TailBeaconX? Do you take TailBeacons in trade?
This listing does not include the TailBeaconX. See the link below for that combo package.
tailBeaconX TSO + AV-30C Bundle | Gulf Coast Avionics
Depending on an evaluation, we can work out a trade-in for you. Please contact our sales team to discuss.