ARTEX ELT 345 15" Antenna
The ARTEX ELT 345 transmits on 406 MHz and 121.5 MHz frequencies and can provide position accuracy with an optional GPS input thanks to the built-in GPS navigational interface. GPS data is embedded from the first emergency transmission and provides Search and Rescue personnel with the aircraft location, within 100 meters, in less than a minute.
This unit can be activated manually with (remote switch or ELT switch) or automatically (the G-switch detects a 2.3G or greater impact). Once activated, the ELT 345 transmits a 406 MHz signal with the beacon's unique registration information and embedded GPS coordinates to the closest search and rescue agency via the Cospas-Sarsat satellite system. The beacon also transmits a 121.5 MHz homing signal to assist search and rescue to pinpoint the aircraft's GPS location.
The ELT 345 provides a quick-and-easy retrofit opportunity with flexible installation options (standard or slim style two-wire remote switch). The ELT utilizes the same RF output using only one coax cable to transmit both 406 MHz and 121.5 MHz signals through either a 15- or 23-inch whip antenna. The ELT's built-in navigational interface does not require aircraft power to operate—which results in lower installation costs—and the stainless steel mounting bracket supplied with the unit has a multiple hole mounting pattern to accommodate legacy footprints.
- Automatic Fixed (AF) Emergency Locator Transmitter (ELT)
- FAA TSO Approved
- Designed for a quick and easy first-time or retrofit installation in experimental and general aviation aircraft
- Installation kit included
- Stainless steel mounting bracket has multiple hole pattern configurations to match legacy ARTEX ELTs as well as ACK, Kannad or AmeriKing ELTs
- Single antenna output for emergency transmission on both 406 MHz (Cospas-Sarsat) and 121.5 MHz (local Search & Rescue) frequencies
- Optional enhanced position accuracy within 100 meters through a built-in GPS interface (NMEA 0183 or RS 232)
- Hermetically sealed G-Switch for increased reliability
- Test the ELT and installation with a satellite-based online confirmation test via ARTEX’s proprietary satellite testing service 406Test.com
- ELT 345
- 15-inch black whip antenna
- Standard 2-wire remote switch (2 x 1.30 Inches)
- Mounting tray
- 6 ft BNC to BNC coax cable
- Install kit.
- Weight: 2 lb
- Dimensions: 6.4 x 2.96 x 3.78 in (transmitter with mounting hardware installed)
- Operating Frequencies: 121.5 MHz ± 6.075 kHz (Emission Designator 3K20A3X)
406.040 MHz ± 1 kHz (Emission Designator 16K0G1D)
Depending on Cospas-Sarsat TAC
- Output Power:406 MHz: 5W for 24 hr @ -20°C to 55°C (-4°F to 121°F)
121.5 MHz: 50 mW for 50 hr @ -20°C to 55°C (-4°F to 131°F)
- Output Connector: BNC female
- Activation: automatic by 4.5 ft/sec (2.3 G ) primary G-Switch and manual activation
- Battery: 6-year, Lithium LiMnO2
- Temperature Certified to: Operating: -20°C to 55°C (-4°F to 131°F)
Storage: -55°C to 85°C (-67°F to 85°F
- Self-test checks: G-Switch enabled, 406 MHz and 121.5 MHz power, NAV system, low battery
- Remote control: on/arm/test
- Accessories:Standard 2-Wire Remote Switch (2.00 x 1.30 in)
15 Inch Black Whip Antenna
Audio buzzer (alerts ground crews of inadvertent activations)
6' BNC to BNC coax cable
- Approvals: Cospas-Sarsat, FAA TSO, Industry Canada
See below for answers to our most popular questions.
how about ELT programming for my aircraft registration and country ? Are you able to send me ELT programmed for my aircraft registration and country ? If so, is programming included in the price?
We are able to program your ELT prior to shipment. This is included in the price.